锐捷ruijie升级过程出现“Upgrade file to Module in slot [M2] failed!”的故障处理
发表时间：2022-08-28 00:24:54
文章来源：超级管理员
浏览次数：530
1）现象
在ctrl 命令行，传输管理板安装包时，出现以下情况
Upgrade file to Module(s) in slot: [M2]
Please wait......
Upgrade file to Module in slot [M2] failed!
CURRENT PRODUCT INFORMATION :
PRODUCT ID: 0x20060050
PRODUCT DESCRIPTION: Ruijie High-density IPv6 10G Core Routing
Switch(S8606) By Ruijie Network
ERROR: UPGRADE LINECARD OR SLAVE CM BOARD FAILED !!!
The program upgraded failed, please retry.
2）原因
从管理板空间不足，导致从板主程序丢失或损坏。
3）解决方法
释放从板空间
a、将主管理板拔出，串口线连到从管理板，把从管理板中线卡的安装包删除。重新插入主管理板，下电重启。
b、在主管理板ctrl 下，尝试重新tftp 传输。当出现以下信息时，说明传输成功。
Upgrade file to Module in slot [M2] OK!
Load temporary upgrade file to memory ...
CURRENT PRODUCT INFORMATION :
PRODUCT ID: 0x20060050
PRODUCT DESCRIPTION: Ruijie High-density IPv6 10G Core Routing
Switch(S8606) By Ruijie Network
SUCCESS: UPGRADING OK.
